Keyless Entry Transmitter: Service and Repair

TRANSMITTER PROGRAMMING

IMPORTANT:
- Up to 4 transmitters can be programmed. Do not operate or program the transmitters in the vicinity of other vehicles that are in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle. The order in which the transmitters are programmed is important. The first transmitter programmed will be transmitter #1, and the second transmitter programmed will be transmitter #2. Use care to program the transmitters correctly.
- All key fobs must be programmed each time any one fob is programmed. The scan tool must stay connected until all of the transmitters are programmed.

1. Install a scan tool.
2. Turn ON the ignition with the engine OFF.
3. Build vehicle in scan tool.
4. Select Body.
5. Select type of radio.
6. Select Body Control Module.
7. Select Special Functions.
8. Select Program Key Fobs.
9. Follow the scan tool on-screen directions.
10. After programming the last transmitter, remove the scan tool.
11. Exit the vehicle. Attempt to lock/unlock the doors to verify the programming.
12. Operate the transmitter functions in order to verify correct system operation.