Blower Motor Relay: Service and Repair

Blower Motor Relay Replacement

Removal Procedure





Caution:
Refer to Battery Disconnect Caution Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.

2. The relay is located in front of the blower motor.

3. Remove the instrument panel (I/P) storage compartment lower panel cover. Refer to Instrument Panel Storage Compartment Replacement Service and Repair in Instrument Panel, Gauges, and Console.

4. Separate the relay from the connector.

5. Remove the screws with the high-blower relay.

Installation Procedure





1. Install the screws with the high-blower relay.

2. Connect the electrical connector.

3. Install the I/P storage compartment lower panel cover. Refer to Instrument Panel Storage Compartment Replacement Service and Repair in Instrument Panel, Gauges, and Console.