Cabin Temperature Sensor / Switch: Service and Repair

Inside Air Temperature Sensor Replacement

Removal Procedure





Caution:
Refer to Battery Disconnect Caution Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.

2. Remove the instrument panel under cover. Refer to Instrument Cluster Trim Panel Replacement Instrument Cluster Trim Panel Replacement in Instrument Panel, Gauges, and Console.

3. Remove the screws securing the in-car temperature sensor with the tube.

Installation Procedure





1. Install the in-car sensor.

2. Install the in-car sensor retaining screws and tighten.

3. Install the air inlet tube and connect the electrical connector.

4. Install the instrument panel under cover. Refer to Instrument Cluster Trim Panel Replacement Instrument Cluster Trim Panel Replacement in Instrument Panel, Gauges, and Console.

5. Connect the battery negative cable.