License Plate Pocket Replacement

License Plate Pocket Replacement

Removal Procedure

1. Remove the right side rear door outside handle and license pocket. Refer to Handle and License Pocket - Rear Door Outside ([1][2]Door Handle Components) .




2. Remove the rivets, retaining the rear license pocket filler, using an appropriate drill and drill bit.
3. Remove the rear license pocket filler from the license pocket.



Installation Procedure





1. Install the rear license pocket filler to the license pocket.
2. Install the rivets, to retain the rear license pocket filler, using a rivet gun.
3. Install the right side rear door outside handle and license pocket. Refer to Handle and License Pocket - Rear Door Outside ([1][2]Door Handle Components) .