Bumper Replacement - Rear

Bumper Replacement - Rear

Removal Procedure

1. Mark the location of the braces and the fasteners.




2. Remove the nuts (1) that retain the rear bumper outer and inner braces to the frame.
3. Remove the bumper (3) from the vehicle.
4. Remove the rear bumper braces from the bumper. Refer toBracket Replacement - Rear Bumper (Bracket Replacement - Rear Bumper) .
5. Remove the rear bumper step pad from the bumper. Refer toStep Pad Replacement - Rear Bumper () .
6. Remove the rear bumper step pad extensions from the bumper, if equipped. Refer toStep Pad Extension Replacement - Rear Bumper () .



Installation Procedure

1. Install the rear bumper step pad to the bumper. Refer toStep Pad Replacement - Rear Bumper () .
2. Install the rear bumper step pad extensions to the bumper. Refer toStep Pad Extension Replacement - Rear Bumper () .
3. Install the rear bumper braces to the bumper. Refer toBracket Replacement - Rear Bumper (Bracket Replacement - Rear Bumper) .




4. Install the bumper (3) to the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

5. Install the inner and outer bumper impact bar brace retaining nuts (1) to the frame.

Tighten the inner and outer bumper impact bar brace retaining nuts to 50 N.m (37 lb ft).