Connecting Rod, Engine

Connecting Rod Bearing Cap Bolt
^ First Pass 25 Nm (18 ft. lbs.)
^ Final Pass 110 degrees
Connecting Rod
Connecting Rod Bearing Clearance 0.18-0.062 mm (0.0007-0.017 inch)
Connecting Rod Bore Diameter 60.322-60.338 mm (2.375-2.376 inch)
Connecting Rod Bore Out-of-Round 0.006 mm (0.00023 inch)
Connecting Rod Length - Center to Center 150 mm (5.9 inch)
Connecting Rod Side Clearance 0.200-0.241 mm (0.008-0.009 inch)
Connecting Rod Journal Diameter 57.122-57.138 mm (2.249-2.250 inch)
Crankshaft
Connecting Rod Journal Diameter 57.122-57.138 mm (2.248-2.249 inch)
Connecting Rod Journal Out-of-Round 0.005 mm (0.0002 inch)
Connecting Rod Journal Taper 0.008 mm (0.0003 inch)
Connecting Rod Journal Width 21.92-22.08 mm (0.863-0.869 inch)