Center Front

SEAT BELT REPLACEMENT - CENTER FRONT

CAUTION: To avoid personal injury to the occupants of the vehicle, observe the following precautions:
- More than one supplier's seat belts are used, therefore, install ONLY the seat belt components specified in the GM parts catalog.
- To verify that the correct seat belt components were installed, insert the seat belt latch in the seat belt buckle. The latch must be fully seated and be retained in the buckle until purposely released.

REMOVAL PROCEDURE




1. Remove the center front seat belt latch bolt.Remove the seat belt latch assembly from the vehicle.




2. Remove the center front seat belt buckle bolt.
3. Remove the buckle assembly from the seat.

INSTALLATION PROCEDURE
1. Install the seat belt buckle assembly to the center front seat.




2. Install the seat belt buckle bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolt to 53 N.m (39 lb ft).

3. Install the seat belt latch assembly to the center front seat.




4. Install the seat belt latch bolt.

Tighten the bolt to 53 N.m (39 lb ft).