Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
85. Throttle Body Assembly Installation
Throttle Body Installation
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the throttle body studs, if required.
Tighten the throttle body studs to 6 Nm (53 lb in).
2. Important: DO NOT use the throttle body gasket again. Install a NEW gasket during assembly.
Install the throttle body gasket (509) to the intake manifold.
3. Install the throttle body and nuts.
Tighten the throttle body nuts to 10 Nm (89 lb in).
4. Install the engine coolant air bleed hose and clamp to the throttle body.