Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously

Manifold Pressure/Vacuum Sensor: Service and Repair

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REPLACEMENT

REMOVAL PROCEDURE

1. Remove the engine sight shield.
2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector (1).

3. Remove the MAP sensor (1).

INSTALLATION PROCEDURE

IMPORTANT: Lightly coat the MAP sensor seal with clean engine oil before installing the sensor.

1. Install the MAP sensor (1).

2. Connect the MAP sensor electrical connector (1).
3. Install the engine sight shield.