Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously

Knock Sensor: Service and Repair

KNOCK SENSOR (KS) REPLACEMENT

REMOVAL PROCEDURE

1. Remove the intake manifold.
2. Gently pry up the rubber covers.
3. Disconnect the knock sensor electrical connectors.

4. Remove the knock sensors.

INSTALLATION PROCEDURE

1. Install the knock sensors.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the sensor to 20 N.m (15 lb ft).

2. Connect the knock sensor electrical connectors.
3. Push down on the rubber covers.
4. Install the intake manifold.