Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2005 >> Silverado 1500 2WD V8-4.8L VIN V >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 4L60-E/4T65-E Automatic Transmission >> 14. Oil Pump Removal
Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

14. Oil Pump Removal



Oil Pump Removal

^ Tools Required
- J 37789-A Oil Pump Remover/Installer
- J 39119 Oil Pump Remover/Installer Adapter





1. Remove all pump bolts (2).
2. Install J 39119 over stator shaft until it locks under splines.
3. Install J 37789-A.





4. To prevent slipping, securely fasten the J 37789-A around the J 39119 by tightening the bolt (1) with a wrench.
5. Turn the T-handle on top of J 37789-A.
6. Lift the pump out of the case.





7. Remove the fluid pump seal (5) that can be removed after the pump is removed.
8. Remove the pump cover to case gasket (6).
pro multis · About Operation CHARM