Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
34a. Electric Machine Clean and Inspect
Electric Machine Cleaning and Inspection
1. Caution: Refer to Safety Glasses Caution in Service Precautions.
Clean the flexplate, stator and rotor with compressed air.
2. Inspect the flexplate (1) for stress cracks around the flexplate-to-rotor bolt hole locations.
3. Inspect the stator for the following conditions:
^ Rust or corrosion at the electrical terminal connection or the electrical windings (2 and 3)
^ Scoring or gouging in the electrical winding surfaces (3)
^ Bent or damaged stator
^ Damage to the exterior of the housing and/or coolant jacket
4. Inspect the rotor for the following conditions:
^ Rust or corrosion of the electrical windings (4)
^ Scoring or gouging in the electrical winding surfaces
^ Bent or damaged rotor
^ Stress cracks around the rotor-to-crankshaft bolt hole locations (5)
5. Inspect the electrical terminal studs and the electrical connection for corrosion.