Horn Replacement - Right

HORN REPLACEMENT - RIGHT

REMOVAL PROCEDURE
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.




2. Disconnect the horn electrical connector.
3. Remove the horn bolt. Reposition the park/turn signal lamp wiring harness for additional clearance.
4. Remove the horn (2) from the radiator support (1).

INSTALLATION PROCEDURE




1. Install the horn (2) to the radiator support (1).

IMPORTANT: Ensure that the black side of the horn is facing forward on the vehicle.

2. Install the horn bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the horn bolts to 9 N.m (80 lb in).

3. Connect the horn electrical connector.
4. Lower the vehicle.