Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
ZF S6-650
Backup Lamp Switch Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle. If equipped with a 6.6L engine, disconnect the backup lamp switch electrical connector (3).
2. If equipped with a 8.1L engine, disconnect the backup lamp switch electrical connector (4).
3. Remove the backup lamp switch.
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the backup lamp switch.
^ Tighten the switch to 20 Nm (15 ft. lbs.).
2. If equipped with a 8.1L engine, connect the backup lamp switch electrical connector (4).
3. If equipped with a 6.6L engine, connect the backup lamp switch electrical connector (3). Lower the vehicle.