Power Steering Gear Inlet Pipe/Hose Replacement (Rack and Pinion)

Power Steering Gear Inlet Pipe/Hose Replacement (Rack and Pinion)

Removal Procedure

Notice: Refer to Power Steering Hose Disconnected Notice in Service Precautions.





1. Remove the power steering inlet hose (2) from the power steering pump (1).
2. Remove the power steering inlet hose (2) from the power steering gear (3).

Installation Procedure
1. Connect the power steering inlet hose (2) to the power steering gear (3).





2. Connect the power steering inlet hose (2) to the power steering pump (1).
^ Tighten the hose connections to 28 Nm (20 ft. lbs.)

Notice: Refer to Fastener Notice in Service Precautions.

3. Bleed the power steering system.
4. Inspect all the hose connections for leaks.