Power Steering Pump Bracket Replacement

Power Steering Pump Bracket Replacement

Removal Procedure
1. Remove the power steering pump from the bracket (3).





2. Remove the positive battery junction block bracket retaining bolts (2) from the power steering pump bracket.





3. Remove the bolts retaining the power steering pump bracket (3) to the engine.
4. Remove the power steering pump bracket from the vehicle.

Installation Procedure





1. Install the power steering pump (3) bracket to the engine.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the power steering pump bracket retaining bolts.
^ Tighten the power steering pump bracket retaining bolts to 25 Nm (18 ft. lbs.).
3. Install the power steering pump to the bracket.





4. Install the positive battery junction block bracket retaining bolts (2) to the power steering pump bracket.
Tighten the battery junction block retaining bolts to 9 Nm (80 inch lbs.).