14. Oil Pump Removal

Oil Pump Removal

^ Tools Required
- J 37789-A Oil Pump Remover/Installer
- J 39119 Oil Pump Remover/Installer Adapter





1. Remove all pump bolts (2).
2. Install J 39119 over stator shaft until it locks under splines.
3. Install J 37789-A.





4. To prevent slipping, securely fasten the J 37789-A around the J 39119 by tightening the bolt (1) with a wrench.
5. Turn the T-handle on top of J 37789-A.
6. Lift the pump out of the case.





7. Remove the fluid pump seal (5) that can be removed after the pump is removed.
8. Remove the pump cover to case gasket (6).