Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2005 >> Silverado 2500 2WD V8-6.0L VIN U >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 4L80-E/4L85-E Automatic Transmission >> Repair Instructions >> 54. Forward Clutch Installation
Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)

54. Forward Clutch Installation

^ Tools Required
- J 38358-A Forward Clutch Assembly Remover/Installer
- J 36850 Assembly Lubricant





1. Align the direct clutch plates in order to aid in the installation of the forward clutch assembly (602).

Important: Following installation of the forward clutch assembly (602), the distance between the top of the speed sensor ring and the pump gasket surface should be approximately 98-99 mm (3.85-3.89 inch).

2. Use the J 38358-A in order to install the forward clutch assembly (602).
3. Install the overdrive carrier thrust bearing (601) (silver side up) onto the forward clutch housing assembly (602). Retain with J 36850 or equivalent.
pro multis · About Operation CHARM