Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Transmitter Synchronization
TRANSMITTER SYNCHRONIZATION
- Resynchronization may be necessary due to the security method used by the remote keyless entry system.The transmitter does not send the same signal twice to the passenger door module (PDM).
- The PDM will not respond to a signal that has been sent previously.This prevents anyone from recording and playing back the signal from the transmitter.
- The panic button should still operate normally when the system is out of synchronization.
- Resynchronization may be necessary under the following conditions:
- The battery in the transmitter is very weak.
- The battery in the transmitter was replaced.
- The battery in the vehicle has been in a low or no charge condition for an extended period of time.
- In order to resynchronize the transmitter with the PDM, perform the following steps:
1. Stand within 1.5 meters (5 ft) from the vehicle.
2. Simultaneously press and hold the LOCK and UNLOCK buttons on the transmitter for 7 seconds. The door locks should cycle in order to confirm resynchronization.