Park Brake Shoe Inspection - Rear Disc Brakes

Park Brake Shoe Inspection (w/Rear Disc)

Caution: Refer to Brake Dust Caution in Service Precautions.

1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Remove the rear brake caliper bracket with the rear brake caliper.

4. Remove the rear brake rotor.

Important: DO NOT apply the park brake pedal with the rotors removed.

5. Inspect and replace the park brake shoe and lining if any of the following conditions are found:
^ Excessive wear indicated by the park brake lining being worn down to the shoe
^ Brake lining cracking
^ Oil or fluid contamination of the brake lining

6. Adjust the park brake shoe.
7. Install the rear brake rotor.
8. Install the rear brake caliper with the rear brake caliper bracket.
9. Install the tire and wheel.
10. Lower the vehicle.