Windshield Washer Reservoir: Service and Repair

WASHER PUMP/RESERVOIR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the battery and battery tray from the vehicle.
2. Remove the inner wheel housing from the vehicle.
3. Disconnect the electrical connector from the washer pump.
4. Disconnect the electrical connector from the washer solvent level sensor.
5. Disconnect the washer hose from the washer pump.
6. Remove the upper bolt from the washer solvent container.




7. Remove the lower bolts from the washer solvent container.
8. Remove the washer solvent container from the vehicle.

INSTALLATION PROCEDURE




1. Install the washer solvent container into the vehicle.
2. Install the lower bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 9 N.m (80 lb in).




3. Install the upper bolt.

Tighten the bolt to 9 N.m (80 lb in).

4. Connect the electrical connector to the washer pump.
5. Connect the electrical connector to the washer solvent level sensor.
6. Connect the washer hose to the washer pump.
7. Install the inner wheel housing.
8. Install the battery and battery tray.