Seat Adjuster Replacement - Front (Manual)

SEAT ADJUSTER REPLACEMENT - FRONT (MANUAL)

REMOVAL PROCEDURE
1. Remove the front seat from the vehicle.
2. Remove the seat trim panel.
3. Remove the seat cushion frame.
4. Remove the seat back frame.
5. Remove the seat back hinge/recliner mechanism.
6. Remove the seat adjuster track cover.




7. Remove the inboard seat belt buckle and nut (1).Disconnect the electrical connection (2).




8. Remove the bar (1) from the adjuster tracks (2). Straighten the tabs in order to remove the bar.
9. Remove the cross brace (3).
10. Remove the EZ entry rod (4), if equipped with the EZ entry feature.
11. Remove the cushion tilt mechanism, if equipped.

INSTALLATION PROCEDURE
1. Install the cushion tilt mechanism, if equipped.




2. Install the EZ entry rod (4), if equipped with the EZ entry feature.
3. Install the cross brace (3).
4. Install the bar (1) onto the racks (2). Bend the tabs in order to secure the bar.




5. Install the inboard seat belt buckle and nut (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nut to 53 N.m (39 lb ft).

6. Connect the electrical connection (2).
7. Install the seat adjuster track cover.
8. Install the seat back hinge/recliner mechanism.
9. Install the seat back frame.
10. Install the seat cushion frame.
11. Install the seat trim panel.
12. Install the front seat in the vehicle.