Marker Lamp Bulb Replacement - Roof (Outer)

MARKER LAMP BULB REPLACEMENT - ROOF (OUTER)

REMOVAL PROCEDURE




1. Remove the screws from the roof marker lamp lens.
2. Remove the roof marker lamp lens.
3. Remove the bulb.

INSTALLATION PROCEDURE




1. In order to install the bulb, push in the bulb until the bulb is seated.
2. Install the roof marker lamp lens.
3. Install the screws to the roof marker lamp lens.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 1.9 N.m (17 lb ft).