Fuel Tank Leak Test

FUEL TANK LEAK TEST

DESCRIPTION
The fuel tank leak test is used to locate any fuel or vapor escaping the fuel tank area. Fuel vapors escaping above the fuel level will be detected when the evaporative emission (EVAP) diagnostics complete one test cycle. The malfunction indicator lamp (MIL) will illuminate when a leak is detected.

DIAGNOSTIC AIDS
- Operate the vehicle under the condition of the customer concern. Under high temperature conditions, fuel vapors may increase to the point of EVAP canister vapor saturation. Fuel vapors would then be released into the atmosphere. Once the engine is running and EVAP purge is enabled, all fuel vapor release would be eliminated.
- Movement of the EVAP pipes or fuel pipes may help find an intermittent condition.

TEST DESCRIPTION

Steps 1-4:

Steps 5-8:

The numbers below refer to the step numbers on the diagnostic table.
4. This step tests for fuel leaks below the fuel tank fuel level.
5. This step locates fuel vapors escaping above the fuel level in the fuel tank.