Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2005 >> Suburban 3/4 Ton 4WD V8-6.0L VIN U >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 4L80-E/4L85-E Automatic Transmission >> Repair Instructions >> 64. Overdrive Carrier Assembly Assemble

64. Overdrive Carrier Assembly Assemble

^ Tools Required
- J 36850 Assembly Lubricant





1. Install the overrun clutch housing thrust bearing (513). Retain with J 36850 or equivalent.





Important: Keep all washers and bearings together with the overdrive carrier pinion gear and pin they were removed with. The pinion gears, pins, washers and bearings must be reinstalled in their original locations.

2. Install one overdrive pinion carrier gear (518) and its roller bearings (517) and thrust washers (515, 516), into the overdrive carrier (514) at the location marked at disassembly.
3. Install the overdrive carrier pinion gear pin (519).
4. Repeat steps 2 and 3 until all four pinion gear assemblies are installed in their original locations.





5. Install the overdrive carrier pinion gear pin retainer (520). Align the pinion gear pins with the retainer slots.
6. Install the overdrive carrier pinion gear pin retainer (521).





7. Install the overdrive clutch roller assembly (512).
pro multis · About Operation CHARM