Moveable Roof Panel Latch Replacement - Rear

MOVEABLE ROOF PANEL LATCH REPLACEMENT - REAR

REMOVAL PROCEDURE
1. Remove the moveable roof panel.
2. Remove the moveable roof panel actuator/motor.
3. Remove the moveable roof panel guide assembly.




4. Remove the fastener retaining the front latch (1) to the front latch side.
5. Remove the front latch (1) from the front latch slide.




6. Slide the rear latch assembly rearward out the end of the moveable roof frame assembly.
7. Remove the rear latch levers (1) from the rear latch slide (2).
8. Remove the rear latch slide (2) from the front latch slide.

INSTALLATION PROCEDURE




1. Install the rear latch slide (2) to the front latch slide.
2. Install the rear latch levers (1) to the rear latch slide (2).
3. Slide the rear latch assembly forward into the slot of moveable roof frame assembly.




4. Install the front latch (1) to the front latch slide.
5. Install the fastener retaining the front latch (1) to the front latch slide.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the front latch retainer to 0.75 N.m (6 lb in).

6. Install the moveable roof panel guide assembly.
7. Install the moveable roof panel actuator/motor.
8. Install the moveable roof panel.