HVAC Module Pass Thru Seal - Auxiliary

HVAC MODULE PASS THRU SEAL REPLACEMENT - AUXILIARY

TOOLS REQUIRED
J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE
1. Remove the HVAC Module-Auxiliary.
2. Remove the screws from the heater core cover-auxiliary.
3. Remove the heater core cover-auxiliary.




4. Remove the HVAC pass thru seal (3) from the HVAC module-auxiliary (1).

INSTALLATION PROCEDURE




1. Install the HVAC pass thru seal (3) to the HVAC module-auxiliary (1).
2. Install the heater core cover-auxiliary.
3. Install the screws to the heater core cover-auxiliary.

Tighten the screws to 1.9 N.m (18 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the HVAC Module-Auxiliary.