Power Steering Pump Bracket Replacement

Power Steering Pump Bracket Replacement
Removal Procedure





1. Remove the power steering pump.
2. Remove the drive belt tensioner.
3. Remove the power steering pump bracket mounting bolts.
4. Remove the power steering pump bracket.

Installation Procedure





1. Install the power steering pump bracket.

2. Notice: Refer to Fastener in Service Precautions.

Install the power steering pump bracket mounting bolts.
Tighten the power steering pump mounting bolts to 50 Nm (37 ft. lbs.).
3. Install the drive belt tensioner.
4. Install the power steering pump.