Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> Cobalt L4-2.2L VIN F >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Transmission Position Sensor/Switch >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Adjustments



Park/Neutral Position (PNP) Switch Adjustment

^ Tools Required
- J 41545 Park/Neutral Switch Aligner

Adjustment





1. Make sure the transaxle manual shaft is in the Neutral position.
2. Align the flats on the transaxle shift shaft with the flats on the transaxle range switch and install the switch.
3. Loosely install the transaxle range switch bolts.





4. Insert the J 41545 as shown and rotate the switch until the tool drops onto position.

5. Notice: Tighten the transaxle range switch bolts.

^ Tighten the range switch bolts to 20 Nm (15 ft. lbs.).
6. Remove the alignment tool.





7. Install the transaxle range switch lever and nut
^ Tighten the transaxle range switch lever retaining nut to 35 Nm (26 ft. lbs.).





8. Important: After adjusting the switch, verify the engine only starts in Park or Neutral. If the engine starts in any other position, adjust the switch.

Connect the transaxle range switch electrical connectors.
9. Install the shift control cable to transaxle range switch lever and verify proper operation.
10. Install the shift control cable to transaxle range switch lever and verify proper operation.
pro multis · About Operation CHARM