Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> Corvette V8-6.0L VIN U >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair >> Knock Sensor (KS) Replacement (Left)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor (KS) Replacement (Left)



KNOCK SENSOR (KS) REPLACEMENT (LEFT)

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.
2. Remove the left exhaust manifold.
3. Remove the left catalytic convertor.
4. Remove the mounting bolt for the knock sensor 1.
5. Disconnect the electrical connector of the knock sensor from the engine harness (3).
6. Remove the knock sensor (2) from the engine block (4).

INSTALLATION PROCEDURE




1. Reconnect the engine harness (3) and the knock sensor (2) electrical connectors.
2. Position the knock sensor 2 on the engine block (4).
3. Install the mounting bolt (1) for the knock sensor 2.
4. Tighten the knock sensor mounting bolt (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the knock sensor mounting bolt to 20 N.m (15 lb ft).

5. Install the left catalytic convertor.
6. Install the left exhaust manifold.
7. Connect the negative battery cable.
8. Program the transmitters. Refer to Transmitter Programming (Domestic and Japan) Transmitter Programming (Export - Including Canada) in Keyless Entry.
pro multis · About Operation CHARM