Splash Guard: Service and Repair

Splash Shield Replacement - Wheelhouse

Removal Procedure




1. Remove the push pin retainers (1) retaining the splash shield (3) to the wheelhouse.
2. Remove the bolt (2) retaining the splash shield (3) to the wheelhouse.
3. Remove the splash shield (3) from the wheelhouse.

Installation Procedure




1. Install the splash shields (3) to the wheelhouse.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolt (2) in order to retain the splash shield (3) to the wheelhouse.

Tighten the bolt to 4 N.m (36 lb in).

3. Install the push pin retainers (1) in order to retain the splash shield (3) to the wheelhouse.