Timing Component Alignment Marks: Locations

^ Use the J41478 and the J41665 in order to install the crankshaft sprocket. Install the sprocket onto the crankshaft until fully seated against the crankshaft flange.
^ Rotate the crankshaft sprocket until the alignment mark is in the 12 o'clock position.





^ Important:
^ Properly locate the camshaft sprocket locating pin with the camshaft sprocket alignment hole.
^ The sprocket teeth and timing chain must mesh.
^ The camshaft and the crankshaft sprocket alignment marks MUST be aligned properly. Locate the camshaft sprocket alignment mark in the 6 o'clock position.

Install the camshaft sprocket and timing chain.





^ If necessary, rotate the camshaft or crankshaft sprockets in order to align the timing marks.