Body - Revised Liftgate Inside Handle Replacement

Bulletin No.: 06-08-66-004

Date: February 22, 2006

SERVICE MANUAL UPDATE

Subject:
SMU - Revised Lift Gate Inside Pull Handle Replacement and Liftgate Trim Panel Replacement

Models:
2006 Chevrolet HHR

This bulletin is being issued to revise the Lift Gate Inside Pull Handle Replacement procedure and the Liftgate Trim Panel Replacement procedure in the Body Rear End sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.











The information shown has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.





Disclaimer