Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> HHR L4-2.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 107. Output Shaft Speed Sensor Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

107. Output Shaft Speed Sensor Installation



Output Shaft Speed Sensor Installation





1. Inspect the vehicle speed sensor (62) for damage to the sensor, the electrical connector, or the O-ring (63).
2. Clean and dry the vehicle speed sensor (62).





3. Install the O-ring (63) onto the speed sensor (62).
4. Install the speed sensor (62) into the transmission case.

5. Notice:
Refer to Fastener Notice in Service Precautions.

Install the speed sensor stud (61).
Tighten the speed sensor stud to 12 Nm (9 ft. lbs.).

pro multis · About Operation CHARM