Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> HHR L4-2.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 44. Transmission Cooler Line Seals Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

44. Transmission Cooler Line Seals Installation



Transmission Cooler Line Seals Installation

^ Tools Required
- J 41239-1A Cooler Line Seal Installer





1. Notice:
Failure to lubricate the cooler line seals with automatic transmission fluid DEXRON � VI before installing into the case or before installing the cooler line pipes into the seals may cause damage to the seal.

Lubricate the inside surface of both cooler line seals (49) with automatic transmission fluid DEXRON � V1.
2. Place a new cooler line seal (49) in the case bore.
3. Install the J 41239-1A on the transmission case (51) at the cooler line bracket bolt hole.
4. Press the new cooler line seal (49) in by tightening the seal pressing bolt on the J 41239-1A until the seal bottoms out in the case bore.
5. Repeat steps 2-4 for the second cooler line seal (49).
pro multis · About Operation CHARM