Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> HHR L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Camshaft Position (CMP) Sensor Replacement-Intake
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position (CMP) Sensor Replacement-Intake



CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT-INTAKE

REMOVAL PROCEDURE




1. Disconnect the intake camshaft position (CMP) sensor electrical connector (2).




2. Remove the CMP sensor bolt.
3. Remove the CMP sensor.

INSTALLATION PROCEDURE




1. Lubricate the CMP sensor O-ring seal with clean engine oil.

IMPORTANT: Inspect the CMP sensor for damage. Replace as necessary.

2. Install the CMP sensor.

NOTE: Refer to Fastener Notice.

3. Install the CMP sensor bolt.

Tighten the bolt to 10 N.m (89 lb in).




4. Connect the intake CMP sensor electrical connector (2).
pro multis · About Operation CHARM