Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> HHR L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Sensors and Switches - Ignition System >> Ignition Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Switch: Service and Repair



Ignition Switch Replacement

Removal Procedure
1. Remove the steering column trim covers.
2. Disconnect the ignition switch harness connector.
3. Turn the ignition switch to the run position.





4. Remove the ignition switch screws.

5. Important:
The ignition switch must be in the run position during removal in order to avoid damage to the ignition switch.

Remove the ignition switch from the steering column.

Installation Procedure





1. Notice:
Refer to Fastener Notice.

Install the ignition switch and screws on to the steering column.

Tighten the screws to 2 Nm (17 inch lbs.).

2. Connect the ignition switch harness connector.
3. Install the steering column trim covers.

pro multis · About Operation CHARM