Floor Shift Control Knob Replacement

Floor Shift Control Knob Replacement

Removal Procedure





1. Pull the shift knob bezel (1) down to expose the shift knob retaining screw.





2. Remove the shift knob retaining screw (1).





3. Remove the shift knob (1) and bezel (2) from the shift control lever.

Installation Procedure





1. Install the bezel (2) and shift knob (1) to the shift control lever.





2. Notice:
Refer to Fastener Notice in Service Precautions.

Install the shift knob retaining screw (1).

Tighten the screw to 2 Nm (18 inch lbs.).





3. Secure the shift knob bezel (1) to the shift knob.