Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> Impala V6-3.5L VIN K Flex Fuel >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair



CRANKSHAFT POSITION (CKP) SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the crankshaft position (CKP) sensor electrical connector (4).




3. Remove the CKP sensor stud.
4. Remove the CKP sensor.

INSTALLATION PROCEDURE




1. Lubricate the CKP sensor O-ring with clean engine oil.
2. Install the CKP sensor.
3. Install the CKP sensor stud.

Tighten the stud to 10 N.m (89 lb in).




4. Connect the CKP sensor electrical connector (4).
5. Lower the vehicle.
pro multis · About Operation CHARM