Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Tremec 6-Speed - Manual Transmission



Vehicle Speed Sensor (VSS) Replacement

Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the electrical connector from the speed sensor.
3. Remove the retaining bolt and retainer for the speed sensor.
4. Remove the speed sensor. Discard O-rings, use NEW only.

Installation Procedure





1. Apply a small amount of clean transmission fluid on the NEW speed sensor O-ring.
2. Install the speed sensor in the transmission.

3. Notice: Refer to Fastener Notice in Service Precautions.

Install the retaining bracket and bolt.

Tighten the retaining bolt to 12 Nm (9 ft. lbs.).

4. Reconnect the electrical connector.
5. Lower the vehicle.