102. Intake Manifold Installation - Left Side

Intake Manifold Installation - Left





1. Apply a 2-3 mm wide by 0.5-1.5 mm high bead of GM P/N 12378521 (Canadian P/N 88901148) sealant on the intake manifold mating surface.





2. Install the intake manifold.

Left Side:

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the intake manifold bolts and nuts.
^ Tighten the intake manifold bolts and nuts to 25 Nm (18 ft. lbs.).