Power Take-Off (PTO) Indicator Inoperative

POWER TAKE-OFF (PTO) INDICATOR INOPERATIVE

CIRCUIT DESCRIPTION

This symptom chart will aid in diagnosing a failed power take-off (PTO) indicator. This diagnostic assumes that the PTO solenoid is functional and only the indicator is failing to come on. When the ignition switch is in RUN, voltage should be present on the Ignition 3 Voltage circuit. When the PTO switch is turned to ON, the LED will illuminate. The indicator has its own ground circuit. The LED and PTO solenoid have different ground circuits. Therefore, the LED may be illuminated when the PTO solenoid is disengaged.

Test Description

Step 1 - Step 8:

The number below refers to the step number on the diagnostic table.
5. This step tests the ground circuit.