Hinged Body Side Window Replacement

The content of this article/image reflects the changes identified in
TSB Bulletin No.: 06-08-48-001

Date: April 03, 2006


Subject:
Revised Hinged Body Side Window Replacement

Models:
1999-2006 Chevrolet Silverado
1999-2006 GMC Sierra



Hinged Body Side Window Replacement



Removal Procedure





1. Place tape from body side to window to hold in place.

2. Remove the side access door trim panel.

3. Disconnect the window latch.

4. Remove the bolts from the hinges.

5. Remove the tape and window from the vehicle.



Installation Procedure





1. Position the window and tape into position.

Note:
Refer to Fastener Notice.

2. Install the bolts to the hinges.

Tighten the bolts to 10 N.m (89 lb in).

3. Install the window latch.

4. Remove the tape and inspect the window.

5. Install the side access door trim panel.