Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> Uplander AWD V6-3.9L VIN 1 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Accelerator Pedal Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal Position Sensor: Service and Repair



ACCELERATOR PEDAL POSITION SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the insulator panel.
2. Remove the connector position assurance (CPA) retainer.
3. Disconnect the instrument panel (I/P) harness electrical connector (1) from the accelerator pedal.




4. Remove the accelerator pedal bolts.
5. Remove the accelerator pedal (2).

INSTALLATION PROCEDURE




1. Install the accelerator pedal (2).
2. Install the accelerator pedal bolts (1).

NOTE: Refer to Fastener Notice.

Tighten the bolts to 10 N.m (89 lb in).




3. Connect the I/P harness electrical connector (1) to the accelerator pedal.
4. Install the CPA retainer.
5. Install the insulator panel.
6. Verify the operation of the accelerator pedal.
pro multis · About Operation CHARM