Rear Wheel Speed Sensor Replacement

Rear Wheel Speed Sensor Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning)
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
2. Disconnect the rear wheel speed sensor electrical connector (1).




3. Remove the rear wheel speed sensor bolt (2).
4. Remove the rear wheel speed sensor (1) from the backing plate.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the rear wheel speed sensor (1) to the backing plate. Secure it with the bolt (2).

Tighten the rear wheel speed sensor bolt to 8 Nm (71 lb in).




2. Connect the rear wheel speed sensor electrical connector (1).
3. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).