Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2009 >> Aveo L4-1.6L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair >> Without Variable Camshaft Phasing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Without Variable Camshaft Phasing




Camshaft Position Sensor Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).
1. Disconnect the negative battery cable.
2. Remove the engine cover bolts and the nuts.
3. Remove the engine cover.




4. Disconnect the camshaft position (CMP) sensor electrical connector.
5. Remove the timing belt front cover. Refer to Timing Belt Replacement (Service and Repair).

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the CMP sensor and bolt.

Tighten the CMP sensor bolts to 7 Nm (62 lb in).




2. Install the timing bolt front cover. Refer to Timing Belt Replacement (Service and Repair).
3. Connect the CMP sensor electrical connector.
4. Install the engine cover.
5. Connect the negative battery cable.

pro multis · About Operation CHARM