Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Lumbar Switch Replacement




Lumbar Switch Replacement

Removal Procedure

1. Remove the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (Seat Cushion Outer Trim Panel Replacement).
2. Remove the switch bezel from the seat assembly. Refer to Driver or Passenger Seat Adjuster Switch Bezel Replacement (Driver or Passenger Seat Adjuster Switch Bezel Replacement).
3. Remove the buttons from the switch (3).




4. Release the tabs (4) that retain the seat switch (3) to the seat bezel.




5. Disconnect the lumbar switch harness (1) from the seat harness.
6. Remove the lumbar switch from the seat bezel.

Installation Procedure




1. Connect the lumbar switch harness (1) to the seat harness.




2. Install the lumbar switch (3) to the seat bezel. Verify that the retaining tabs (4) are fully seated.
3. Install the buttons on the switch.
4. Install the switch bezel assembly to the seat assembly. Refer to Driver or Passenger Seat Adjuster Switch Bezel Replacement (Driver or Passenger Seat Adjuster Switch Bezel Replacement).
5. Install the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (Seat Cushion Outer Trim Panel Replacement).