Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2009 >> Corvette V8-6.2L >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor: Service and Repair




Blower Motor Replacement

Removal Procedure

1. Remove the right hand (RH) insulator panel. Refer to Instrument Panel Insulator Panel Replacement (Service and Repair).

Warning

Unplug the blower motor before removal. Blower motor case contact with any ground may start the fan and cause personal injury.

Note: The blower motor resistor is internal to the blower motor assembly and is not serviced separately.

2. Disconnect the blower motor electrical connector.




3. Remove the blower motor retaining screws.
4. Remove the blower motor from the HVAC module.

Installation Procedure




1. Install the blower motor to the HVAC module.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the blower motor retaining screws.

Tighten the screws to 1.6 Nm (14 lb in).

3. Connect the blower motor electrical connector.
4. Install the RH insulator panel. Refer to Instrument Panel Insulator Panel Replacement (Service and Repair).

pro multis · About Operation CHARM