Crankshaft, Engine

CRANKSHAFT JOURNAL DIAMETER & LIMIT

Crankshaft Main Journal Diameter
Production 64.992-65.008 mm (2.558-2.559 in)
Service 64.992 mm (2.558 in)

Crankshaft Main Journal Out-of-Round
Production 0.003 mm (0.000118 in)
Service 0.008 mm (0.0003 in)

Crankshaft Main Journal Taper
Production 0.01 mm (0.0004 in)
Service 0.02 mm (0.00078 in)

Crankshaft Rear Flange Runout 0.05 mm (0.002 in)

Crankshaft Reluctor Ring Runout - Measured 1.0 mm (0.04 in) Below Tooth Diameter 0.7 mm (0.028 in)

Crankshaft Thrust Surface
Production 26.14-26.22 mm (1.029-1.0315 in)
Service 26.22 mm (1.0315 in)

Crankshaft Thrust Surface Runout 0.025 mm (0.001 in)

Crankshaft End Play 0.04-0.2 mm (0.0015-0.0078 in)