Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2009 >> HHR L4-2.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Mount >> Service and Repair >> Transmission Front Mount Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Front Mount Replacement




Transmission Front Mount Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Support the transaxle with an appropriate jack.




3. Remove the front transaxle mount thru bolt.




4. Remove the front transaxle mount to transaxle bolts.
5. Remove the front transaxle mount from the vehicle.

Installation Procedure

Note: The transaxle bolts must be torqued in a mandatory sequence as shown.





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the front transaxle mount and transaxle bolts.

Tighten the bolts to 90 Nm (66 lb ft).




2. Hand tighten the front transaxle mount thru bolt.

Note: The front and rear transmission mounts must be allowed to settle with the thru bolts loosened.

3. Loosen the rear trans mount thru bolt.
4. Tighten the transmission mount thru bolts in the following order.

1. Tighten the rear bolt to 100 Nm (74 lb ft).
2. Tighten the front bolt to 100 Nm (74 lb ft).

5. Lower the vehicle.

pro multis · About Operation CHARM